Gold Member Since 2009
Audited Supplier
Changzhou Snug Solar Energy Co., Ltd.

Solar Heater, Water Heater, Solar Energy manufacturer / supplier in China, offering Slope Roof Solar Collector, High Quality Low Angle Heat Pipe Solar Collector, Split Solar Heater System. Heat Pipe with Vacuum, Tube and so on.

(/ )

Slope Roof Solar Collector

FOB Price: US $99 / Piece
Min. Order: 1 Set
Min. Order FOB Price
1 Set US $99/ Piece
Get Latest Price
Production Capacity: 40, 000-50, 000 sets / year
Transport Package: carton
Payment Terms: L/C, T/T, D/P, Paypal, Money Gram, Western Union

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: SK
  • Application: Water Heater, Solar Thermal, Air Conditioning System
  • Capacity: 100L-1000L
  • Specification: CE, Solar keymark
  • HS Code: 84191900
  • Type: Pressurized
  • Pipe Material: Glass
  • Trademark: snugsolar / OEM
  • Origin: China
Product Description
Heat pipe Solar Water Heater;

The solar water heating system is consisted of solar collector, heat preservation water tank, solar power workstation and the pipe. The solar collector is consisted of super conducting vacuum heat collecting tube and header, so it's of great efficiency of heat collecting. The absorbing percentage of the glass vacuum collector is more than 94%. In the sunny days of spring or autumn, each collecting tube could make the water up to 90 degrees centigradeonly in 2.5 hours. The water tank uses enamel as internal bladder and polyurethane integral foaming as heat preservation material to improve the heat preservation ability. And it makes the system be used as usual under minus 50 degrees centigrade. The high corrosion-resistant and good heat preservation PPR pipe is used as the system's pipe, so it adds the good efficiency and long service of the system.

Working principle:
1. When the temperature of the Split Solar Water Heater heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2. The circulation pump makes heat-conducting liquid circulate automatically.
3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5. In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device.
Manifold SUS 304 Food Grade Stainless Steel
Frame Stainless Steel
Header Pipe Copper
Insulation Polyurethane 55mm
Rubber Seals and Rings UV stabilized high temperature silicon rubber
Optimal installation angle 30-70°Vertical,0°Horizontal
Maximum Operating Pressure 6bar-85psi
Pressure Drop 700Pa 3.3L/min for 20 tube manifold
Optimal flow rate 0.1L/min/tube-0.026G/min/tube
Performance Data Conversion Factor: ho=0.717
Loss Coefficients:a1=1.52,a2=0.0085
Send your message to this supplier
Mr. Aaron
To: Mr. Aaron

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now